NABUCCO CHRONOGRAPH
DESCRIPTION OF THE DIAL AND BUTTON
WATCH HANDS
CHRONOGRAPH HANDS
HOURS
HAND
MINUTES
HAND
SECONDS
HAND
PUSH-BUTTON
A
:
- START
- STOP
PUSH-BUTTON
B
:
- ZERO RESET
DATE
WINDOW
12 HOURS
COUNTER
30 MINUTES
COUNTER
60 SECONDS
COUNTER
DATE SETTING
PUSH-BUTTON
RAYMOND WEIL
nabucco
chronograph is equipped with a tachometric
scale, enabling the measurement of speed in km/h.
Your watch is fitted with a screw-down crown. Before winding or
adjusting the watch, it is therefore necessary to unscrew the crown by
turning it anti-clockwise. The crown will then be released by a spring.
After adjusting settings, press the crown and gently turn it clock-
wise, and then screw it carefully down to maintain your watch’s
water-resistance.
SETTING THE TIME AND CHANGING THE DATE
1
2
3
1
Screw-down crown
2
Manual winding position
3
Time setting
setting the Time
In order to adjust the time, unscrew the crown and pull-it out to
position
3
. Turn it forwards or backwards until the hands indicate the
desired time.
After setting the time, always push the crown back in to position
1
,
in order to restart the hands and press lightly on the crown, while
turning it clockwise, and screw it back in gently in order to preserve
your watch’s water-resistance.
changing the date
DATE SETTING
PUSH-BUTTON
DATE
WINDOW
In order to adjust the date rapidly, press the date setting buton until
the required date appears in the window at 4:30.
The automatic date correction takes place as the hours hand passes
midnight. During this operation, your watch will continue to function
and so will not need to be reset.
NOTE
: Do not change the date when the watch is showing a time
between 10 p.m. and 2 a.m. The watch’s automatic date-change
mechanism engages during this time period and the movement
could be damaged.
After completing these settings, press lightly on the crown, while
turning it clockwise, and screw it back in gently in order to preserve
your watch’s water-resistance.
USE OF THE CHRONOGRAPH
The chronograph function can only be used when the crown is in
position
1
.
start
Press button
a
to activate the seconds hand
of the chronograph. If the timed activity lasts
longer than 60 seconds, the time elapsed will
appear progressively on the minutes counter
and on the hours counter.
stop
Press push-button
a
a second time to stop
the chronograph and obtain the time that has
elapsed (in hours, minutes and seconds). By
pressing button
a
again, timing is restarted
immediately. Thus you can measure several
consecutive time durations.
Resetting to Zero
After having stopped the chronograph by push-
ing on button
a
, press button
b
in order to reset
all the chronograph counters to zero. Your watch
is now ready to start timing again.
A
BA
B
A
B
01/2012 – PRINTED IN SWITZERLAND
