PUSH-BUTTON
A
START/STOP
PUSH-BUTTON
B
ZERO RESET
SETTING THE TIME
In order to adjust the time, pull the crown out to position
3
and turn it forwards or backwards until the hands indicate
the desired time.
After setting the time, always push the crown back in to
position
1
, in order to restart the hands and to preserve
your watch’s water-resistance.
USE OF THE CHRONOGRAPH
The chronograph function can only be used when the
crown is in position
1
or
2
.
START
Press push-button
A
to activate the seconds hand of
the chronograph. If the timed activity lasts longer than
60 seconds, the time elapsed will next appear on the
minutes counter and after a further 30 minutes on the
hours counter.
STOP
Press push-button
A
a second time to stop the chronograph
and obtain the time that has elapsed (in hours, minutes and
seconds). By pressing push-button
A
again, timing restarts
immediately. Thus you can measure several consecutive
time-durations.
RESETTING TO ZERO
Press push-button
B
in order to reset all the chronograph
counters to zero. Your watch is now ready to start
timing again. Resetting to zero is only possible once
the chronograph has been stopped.
NOTICE
Disposal of a watch by non-compliant methods
may cause harm to the environment and is heav
ily fined according to the regulations
established by each one of the EU member
countries in application of the Directive on Waste Electrical
and Electronic Equipment (Directive 2002/96/EC WEEE).
Should you need to dispose of an old watch, please set it
aside for separate waste collection or give it to a retailer
when purchasing a new watch.
RAYMOND WEIL and its approved dealers are at your
disposal to provide you with additional information on
the subject.
2/2
