13
Using your TN-206
Step 2 - Connect to Bluetooth-
enabled device
After getting and fixing the GPS signal, now
you can establish a communication link
between your TN-206 and the Bluetooth-
enabled device.
From your Bluetooth-enabled device, perform a
Bluetooth device discovery. Please refer to the user
documentation for your Bluetooth-enabled device
for instructions.
Step 3 - Using GPS software
Start your GPS software on your Bluetooth-
enabled device.
Make sure that the software is set for the COM port
that your Bluetooth-enabled device will use for serial
communication and it is pointing to TN-206 as its
GPS receiver.
Now you should be ready to use your GPS software
as directed by the user documentation that came
with the software. More configurations may apply.
Enter “2003” when asked for a passkey
for the device.
