Wind Vane Service Manual
3
Introduction
Safety
WARNING:
Product servicing
The wind vane must be serviced in accordance with the Raymarine instructions provided. Failure
to do so could result in poor product performance, personal injury and/or damage to the boat.
WARNING:
Electrical safety
Always switch off the power supply before you work on Raymarine products.
CAUTION: Electrostatic Discharge
The wind vane contains electrostatic sensitive components. Always observe the appropriate
precautions when handling, shipping, and storing these products. Failure to do this could result in
permanent damage to the equipment.
Overview
This manual provides servicing information for the Raymarine short-arm and long-arm wind vanes, part numbers E22078
and E22079, respectively. The following information is provided:
• Tools and test equipment.
• An exploded view of the wind vane.
• A list of replaceable parts.
• Disassembly and assembly instructions.
• Functional tests.
• Wind vane PCB circuit, layout and parts.
Tools & test equipment
The following tools and test equipment are required:
• Two small Pozidriv screwdrivers.
• One small flat-blade screwdriver.
• Serviceable ST60 Wind instrument.
• 12 V power supply.
• Multimeter.
