Raymarine T210, Руководство пользователя, Страница: 16 / 36

Maxi Display
14 www.tacktick.com
4.2 Audible Signals and Alarms
At stages during its operation your Maxi Display will beep to indicate
alarms or moments of importance.
Power-up The display will beep once as it switches on.
Button Press The display will beep once each time a button is
pressed. A second beep is issued after a 2 second hold
down of the
button.
Timer The display will beep once at each minute of the
countdown.
With 1 minute left to go a beep will sound every 10
seconds.
With 10 seconds to go a beep will sound every second.
Countdown complete will be indicated by a single burst
of three beeps.
Alarm Continuous bursts of three beeps will indicate an alarm.
The alarm activated will be indicated on the display,
accompanied by the flashing (BELL) symbol.
Pressing any button will silence the alarm. See fault finding section,
page 28.
The Alarms below will be indicated on the Maxi Display, however they
must be configured using another Tacktick Micronet display connected
to the network. See the appropriate display user guide for details of
configuring alarms.
Depth Shallow Alarm
The water depth has fallen below the preset alarm level.
This alarm does not sound as the depth increases above
the preset alarm level.
Depth Deep Alarm
The water depth has increased above or fallen below the
preset alarm level.