Cables
Before installing the system cables, consider the following
points.
• All cables need to be well clamped and protected from
physical damage and exposure to heat and humidity.
• Cables with severe bends are not allowed.
• Where a cable passes through an exposed bulkhead or
deckhead, a watertight grommet or swan neck tube should
be used.
Power Requirements
Follow the power requirements to avoid damage to the
system. The Raymarine STV37 / STV45 has been designed
to work on a boat’s power supply rated from 9 ~ 30 V DC.
If your receiver(s) and television(s) require a 110V/240V AC
power supply, you will need to install a suitable DC to AC
converter to operate the unit(s) from your boat’s DC power
supply.
RF Cable
This cable is supplied at a length of 49ft (15m). If a longer
length is required you should replace this cable with an
extended RF cable, available separately.
Extending the Cables
The cables that have been supplied with your Raymarine
system should be of adequate length to complete the
installation on most vessels.
Note:
Exceeding the indicated cable lengths will result in
reduced performance of your system.
