Raymarine ST7000, Руководство пользователя

Страница: 72 / 111

Chapter 4: Customising the System
55
To set up a Maxiview instrument group:
1. At the ST7000 Plus, select the
MAXI REM
Data Page.
2. Press one of the instrument group keys so that one of the
Maxiview instruments is selected (indicated by inverse display
characters on the selected instrument).
3. Hold down the up and down arrow keys for 4 seconds, to put all
the Maxiview instruments and the ST7000 Plus into group setup
mode. When this occurs, one Maxiview instrument displays
reverse video with a flashing cursor, and the ST7000 Plus screen
text will alternate between
MAXI REM
and
DSP SETUP
.
4. At the ST7000 Plus, use the up arrow or down arrow key to select
an instrument to be the first in the group, i.e. so the required
instrument changes to inverse video.
5. Use the ST7000 Plus to allocate a group letter and sequence
number to the selected Maxiview. To do this, use the
resp
key to
toggle between group letter and sequence number, and the
track
key to set the identifying character. When the Maxiview
instrument has been properly identified it should display its group
letter and sequence number, e.g.
J2
.
Note: All Maxiview instruments are selectable while in group setup
mode.
6. Press either the up arrow or down arrow key to select another
Maxiview instrument, and repeat the procedure in step 5.
7. Repeat the procedures in steps 5. and 6. until all instruments in the
group have been identified.
Note: If you have more than eight Maxiview instruments, a second
group, operated by another remote keypad, must be created. The
identification code for additional keypads and display heads would be
for example,
K1, K2
etc.
8. Use the arrow keys to select one of the Maxiview instruments in
the group to which you want to allocate the ST7000 Plus as a
keypad.
9. Hold down the up and down arrow keys together for 1 second.
The ST7000 Plus screen text will alternate between
MAXI REM
and
KPD SETUP
, and each of the Maxiview instruments in the selected
group will display prompt messages similar to those for the
standard instrument.
118ch04.p65 07/01/99, 12:43 55