20
ST60 Graphic Display Operating Guide
Setting units
With the
Units setup
screen displayed, use the
button to move to each data
type in turn and for each, use the
track
or
reset
button to select the required
unit.
NMEA OUT on/off
The NMEA OUT on/off screen enables you to set which function the
NMEA
OUT
connector provides. This is either:
•
NMEA data out.
or
•
Alarm signals for the Auxiliary Alarm.
If want to output NMEA data, use the
track
or
reset
button to select
ON
. If
you want to output alarm signals to the Auxiliary Alarm, select
OFF
.
Auxiliary Alarm select
Use the
ALARM DRIVE
screen to determine which alarms you want to sound at
the Auxiliary Alarm.
Note:
The
NMEA OUT
function must be
OFF
, to enable the Auxiliary Alarm
to be used.
Use the
track
or
reset
button to set the
ALARM DRIVE OFF,
if you do not want
any alarms to sound at the Auxiliary Alarm. Otherwise, set it
ON
.
If you have set the
ALARM DRIVE ON,
use the
button to move to each alarm
in turn and for each, use the
track
or
reset
button to either enable (
✓
) or
disable (
✘
) the alarm.
Pilot pop-up
Use the
track
or
reset
button to set the
PILOT POPUP either ON
or
OFF,
as
required.
Instrument configuration
You can streamline the operation of the instrument by defining which pages
are available for display on a day-to-day basis, and switching off pages you
do not wish to see.
81226_1.book Page 20 Wednesday, November 19, 2003 9:53 AM
