Raymarine ST40 Wind, Руководство пользователя

Страница: 33 / 42

Chapter 4: Calibration
25
4.3 Intermediate calibration
Intermediate calibration enables you to:
• Check the instrument software version.
• Check the instrument status - either master (shown as
RPTR NO
) or
repeater (shown as
RPTR YES
). You cannot change this.
Follow the procedure in the Intermediate calibration flow diagram.
Software
version
D4765-2
for approximately 4 seconds hold down and
Instrument
status
To return to normal operation from either screen,
WIND
CAL
During normal operation
ST40
WIND ST40
for approximately 2 seconds and hold down
INTERMEDIATE CALIBRATION
Note:
If there is no key activity when
the
Software version screen
is displayed, calibration will
time out to normal operation
after 5 seconds
4.4 Dealer calibration
Dealer calibration enables you to set:
• User calibration on/off.
• Boat show mode on/off.
Dealer calibration also gives access to the
Factory defaults
screen.
This enables you to reapply the factory settings if you want to reset the
instrument to a known operating condition.
Follow the procedure in the Dealer calibration flow diagram.
160_3c04.p65 01/05/01, 16:16 25