Raymarine ST40 Depth Instrument, Руководство пользователя, Страница: 22 / 44

14 ST40 Depth Instrument Owner’s Handbook
The transducer should be sited within the clear water flow areas
indicated by the shaded areas in the following illustration.
Sailing vessel
Planing power
vessel
Displacement power
vessel
Transducer siting
D4349-1
The transducer should also:
• Be ahead of the propellers (by a minimum of 10% of the water line
length ).
• Be at least 150 mm (6 in) away from the keel (ideally ahead of the
keel if a sailing yacht).
• Be as near as possible to the centre line of the vessel.
• Be clear of other through-hull fittings or projections.
• Have sufficient clearance inside the hull to fit the nut.
• Have 100 mm (4 in) of headroom to allow for withdrawal.
In addition to the above requirements, the depth transducer must be
mounted within 10
0
of the vertical, forward, aft and athwart ships.
158_2c03.p65 01/05/01, 13:56 14