Chapter 1: SmartPilot Operation
11
3. The display automatically returns to the previous mode if you do not
press a key for 10 seconds:
•
if you press another mode key within 10 seconds you will select the
mode assigned to that key (for example:
auto
selects Auto mode,
standby
selects Standby mode)
Notes: (1)
You can also adjust the lighting level from any other SeaTalk
instrument or control unit.
(2)
When you switch off the unit you lose any changes you have
made to the lighting level.
How do I adjust the contrast?
To set the contrast level for the ST8001 display:
1. With the autopilot in Standby mode, press the
disp
key for one second to
access the
LAMP
screen.
2. Press the
disp
key for one second again, to display the
CONTRAST
screen.
3. Use the
up
and
down
arrow keys to set the required contrast level (from
1
to
15
).
4. The display automatically returns to the previous mode if you do not
press a key for 10 seconds:
Note:
if you press another mode key within 10 seconds you will select the
mode assigned to that key (for example:
auto
selects Auto mode,
standby
selects Standby mode)
D5517-2
1 second
Содержание SmartPilot ST8001
