background image

20

S1 Wheel and Tiller Pilots Commissioning Guide

i. turn off the power 

ii. reverse the red and green wires connected to the 

RUDDER

 inputs on the 

SmartPilot computer

iii. switch on the power and recheck

Check the autopilot steering sense

1. Manually center the wheel, then press the 

auto

 key so the SmartPilot is in 

Auto mode.Check that the display shows AUTO.

Be ready to press 

standby

 if the rudder moves hardover. 

2. Press the 

+10

 key once.

            

3. Check that the rudder moves to starboard a few degrees and then stops.

• if the rudder drives hardover, immediately press 

standby

 to prevent fur

ther rudder movement

4. If the rudder moves to port or the rudder drives hardover:

i. press 

standby

ii. turn off the power

iii. reverse the motor wires connected to the SmartPilot computer

iv. switch on the power and recheck

Note:  

If the rudder overshoots and has to drive back or starts to hunt back and forth, you 

will need to increase the rudder damping level manually (See page 45).

Step 4  Adjust key SmartPilot settings

The next step in the commissioning process requires the adjustment of some key 

settings. To achieve this you will need to enter one of the four calibration modes, 

Dealer Calibration. For more information on the various calibration modes and 

their uses see 

Chapter 3, Adjusting Settings

.

D9324-1

81282_1.book  Page 20  Monday, October 2, 2006  1:58 PM

All manuals and user guides at all-guides.com

Содержание S1 TillerPilot













































































Отзывы: