Raymarine RVM-400 Series, Руководство по установке, Страница: 17 / 58

4.1 Parts supplied — RVM-4xx series transducers
The following parts are supplied with each RVM-4xx series transducer.
Item
Description
1 Documentation pack
2 Locking collar kit (for transducer cable connector), consisting of:
• 2 x Split rings (includes spare)
• 1 x O-ring
• 1 x Locking collar
• 1 x Split ring fitting tool
3
Hull nut
4 Cable protector
5 Large internal isolator sleeve
6 Rubber washer
7 External isolator plate
8 High speed nose cone
Item Description
9
Transducer (including fitted cable — refer to length stated
below)
10 2 x Nuts for anti-rotation studs
11 2 x Small washers for Anti-rotation studs
12 2 x Small internal isolator sleeves
13 2 x External isolator sleeves
Transducer cable length
The length of the cable fitted to the transducer is:
•
RVM-400 — 8 m (26.2 ft)
• RVM-412 and RVM-420 — 2 m (6.5 ft)
Additional parts supplied
The following additional cables are supplied when ordering a split pair set of
transducers.
Item
Description
1 2 x Locking collar kit, consisting of:
• 2 x Split rings (includes a spare)
• 1 x O-ring
• 1 x Locking collar
• 1 x Split ring fitting tool
2 Extension cable 8 m (26.2 ft.) for connecting the single end of
the “Y-cable” adapter to a compatible MFD or sonar module.
3 “Y-cable” adapter for connecting a split pair of transducers to a
single extension cable. Cable length: 0.3 m (0.98 ft.)
Parts supplied
17