Raymarine RCR-1, Руководство по установке

Страница: 31 / 46

8.4 Inserting MicroSD card into reader
1. Press the tab in and pull the lid open to expose the card slot.
2. With the MicroSD card’s connectors facing down, carefully insert the card into the card reader.
3. Push the MicroSD card into the reader until it clicks into place. DO NOT use a metallic instrument
such as a screwdriver or pliers to insert or remove a card.
Important:
• Keep the product’s lid closed when not in use.
• DO NOT open the product’s lid when it is at risk of getting wet.
8.5 Removing MicroSD card from reader
1. With the cover lid open, push the MicroSD card in until it clicks.
2. Pull the MicroSD card free from the card reader.
8.6 Using the RCR-1 with cartography
Important considerations when using the RCR-1 to read electronic chart cards.
Due to the high data bandwidth requirements of electronic charts (especially when sharing with other
networked MFDs), Raymarine recommends that an MFD internal card reader is used for cartography
whenever possible.
If the RCR-1 is used for cartography, you must first fit suppression ferrites; for more information
refer to:
p.25 — Fitting suppression ferrites
Operation
31