manualshive.com logo in svg

Raymarine Raynav 300 GPS Plotter, Руководство пользователя

Поделиться
Скачать
Raymarine Raynav 300 GPS Plotter Скачать руководство пользователя страница 14

1-4

Raynav 300 GPS Plotter

•

Man OverBoard (MOB) to navigate back to a missing person or 
object

•

Data Log display

For systems with an autopilot, when the status and locked heading 
information change, the new data can be displayed.

GPS Data Pages

Amongst a number of information pages, the GPS Data pages provide a 
series of four textual displays, selected by the associated soft key. These 
provide essential information associated with plotting a course for your 
vessel.

•

Fix  status

•

Steering Indication

•

Position Latitude/Longitude

•

Waypoint Bearing and Range

•

Course Over Ground (COG)

•

Speed Over Ground (SOG)

•

Current Time

•

Sunrise and Sunset Times

•

Twilight Times

The range of pages is detailed in 

Selecting the Display Mode

 on 

page 2-4

. 

The complete range of pages is described fully in 

Data Display Pages

 on 

page 3-2

.

1.4 Operating Controls

Operation utilizes a number of buttons and on-screen controls. These 
include:

•

A trackpad providing up, down, left, right and diagonal control of an 
on-screen cursor.

•

Eight dedicated (labelled) control keys. 

•

Four soft keys with labels displayed on screen.

•

Pop-up menus, displayed on-screen, from which options are selected.

•

Database lists, displayed on-screen, which enable editing of items.

Note:

The cursor is the cross-hair symbol (+) visible on the display. The 

trackpad moves the cursor to select a position or item on the chart.

The controls are shown in 

Figure 1-1

. They are back-lit for night-time 

use. When you use certain controls, a help message is displayed at the top 
of the screen (unless you switch help off as described in 

Chapter 4

). The 

following paragraphs describe the controls and on-screen facilities.

Содержание Raynav 300 GPS Plotter









































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды