Raymic wired handset installation
instructions
Warning: Product installation and
operation
• This product must be installed and operated in
accordance with the instructions provided. Failure
to do so could result in personal injury, damage to
your vessel and/or poor product performance.
• Raymarine recommends certified installation
by a Raymarine approved installer. A certified
installation qualifies for enhanced product
warranty benefits. Contact your Raymarine dealer
for further details, and refer to the separate
warranty document packed with your product.
Product disposal
Dispose of this product in accordance with the WEEE Directive.
The Waste Electrical and Electronic Equipment (WEEE) Directive
requires the recycling of waste electrical and electronic equipment
which contains materials, components and substances that
may be hazardous and present a risk to human health and the
environment when WEEE is not handled correctly.
Equipment marked with the crossed-out wheeled bin
symbol indicates that the equipment should not be disposed of
in unsorted household waste.
Local authorities in many regions have established collection
schemes under which residents can dispose of waste electrical
and electronic equipment at a recycling center or other collection
point.
For more information about suitable collection points for waste
electrical and electronic equipment in your region, refer to the
following table:
Region
Website
Region
Website
AT
IT
BE
LT
BG
LU
https://aev.gou-
vernement.lu/fr.html
CY
LV
CZ
MT
DE
NL
DK
PL
EE
PT
ES
RO
FI
SE
Region
Website
Region
Website
FR
,
SI
GR
SK
IE
UK
www.waste-
care.co.uk/com-
pliance-ser-
vices/weeecare
Raymic wired handset
The Raymic wired handset is compatible with the Ray60, Ray70,
Ray90 and Ray91 VHF DSC radios.
Ray60 / Ray70
The Raymic wired handset can be connected directly, or via an
adaptor cable, to the second station connector located on the rear
of the Ray60 and Ray70 to create a second handset station.
Ray90 / Ray91
The Raymic wired handset can be connected to the handset
station connectors on a Ray90 and Ray91, a total of 2 Raymic
wired handsets can be connected.
Parts supplied
1
Through panel
cable mounting
dust cap.
6
Handset hook plate.
2
Through panel
cable mounting
plate screws x 3.
7
Handset holster and hook plate
mounting screws x 6.
3
Through panel
cable mounting
nut.
8
Through panel cable mounting
plate gasket.
4
Through panel
cable mounting
plate.
9
Wired handset holster.
5
Raymic wired
handset.
10
Documentation.
Unpack your product carefully to prevent damage or loss of
parts. Check the box contents against the list above. Retain the
packaging and documentation for future reference.
Document number: 87354-1
AA;8592;2018-04-20T14:59:05
Date: 03-2018