Raymarine Ray240, Руководство пользователя

Страница: 48 / 78

46 Ray240 User Manual
3.3 Where should I install my radio?
CAUTION: Compass safe distance
The compass safe distance, measured in accordance with EN60945,
for the Ray240 is 0.9 m.
Before installing the Ray240 you should plan the installation, considering the
following points:
Transceiver Unit
You should mount the transceiver unit on a bulkhead, below decks that is:
• dry, protected and well ventilated.
• free from high operating temperatures.
• free from excessive vibration.
• accessible for cable routing.
• at least three feet from the antenna.
• in such a position that accidental contact with the heatsink is avoided.
You must avoid mounting it:
• in an engine compartment.
• where there might be flammable vapors, such as in an engine room or
compartment, or in a fuel tank bay.
• where there is water splash or spray from bilges and hatches.
• where it is a risk of physical damage from heavy items, such as hatch covers,
tool boxes, etc.
• where it might be covered by any other equipment.
Handset and cradle
You should mount the primary handset and cradle:
• where they are easily accessed from the location where the ship is normally
navigated. Federal Communications Commission (FCC) law requires that the
primary handset is located in the wheelhouse or a room adjacent to it.
• at least three feet from the antenna.
Active speaker
You should mount the active speaker in a position where it is easy to hear and is
convenient for your use.