Chapter 2: Installation
19
Charging Rechargeable Ni-MH Cells
The Ni-MH batteries must be charged with the radio
powered off for at least 24 hours before initial use. To
charge the batteries:
1. Insert the radio with the battery tray attached into
the Ni-MH charger unit.
2. Connect the AC wall adapter into a standard wall
outlet.
—or—
Connect the Cigarette Lighter Adapter into a
standard 12VDC Cigarette Lighter.
3. Insert the molded plug into the connector on the
side of the battery charger.
The CHARGE indicator LED on the front of the
charger lights when it is receiving voltage from
the AC adapter.
CAUTION:
1. Make sure the switch just below the battery com-
partment is set to the Ni-MH position.
2. Do not operate radio in charger when battery tray
is empty. This may damage radio.
3. Do not transmit with the radio in the charger as
this may damage the radio.
Charge the batteries with the radio powered off for at least 24 hours before using
the radio for the first time or if the radio has not been used in several months.
Under normal use, you can charge the batteries while the radio is powered on.
With heavy usage, however, the radio should be powered off to maximize
charging efficiency. Normal use is defined as a duty cycle of 5% receive and 95%
standby time.
LED
D6695-1
Содержание Ray101
