• located at least 1.3meters (4.2ft.) from
licence RSS d'ISEDC.
(Français)
1.
This device may not cause interference; and
2. This device must accept any interference, including
interference that may cause undesired operation
of the device.
This Class B digital apparatus complies with Canadian
ICES-003.
Cet appareil est conforme aux normes d'exemption de
Son fonctionnement est soumis aux deux conditions
suivantes:
1.
cet appareil ne doit pas causer d'interférence, et
2. cet appareil doit accepter toute interférence,
notamment les interférences qui peuvent affecter
son fonctionnement.
Cet appareil numérique de la classe B est conforme à la
norme NMB-003 du Canada.
Warning: VHF Antenna
isolation
To prevent galvanic corrosion your VHF
antenna must be isolated from any vessel
metalwork using a suitable insulated e.g.
plastic, mounting bracket.
Warning: Maximum
Permissible Exposure
Failure to observe these guidelines
may expose those within the Maximum
Permissible Exposure (MPE) radius to RF
radiation absorption that exceeds the
FCC MPE limit. It is the radio operator’s
responsibility to ensure that no person
comes within this radius.
For optimal radio performance and minimal
human exposure to Radio Frequency (RF)
electromagnetic energy, you must ensure
that the antenna is:
• connected to the radio before
transmitting;
• located where it will be away from people;
the radio’s main unit.
Caution: Perform regular
radio checks
Perform regular radio checks when using
your vessel, as recommended in radio
training and certification schemes and radio
equipment rules of use.
Caution: Ensure proper radio
use
Under no circumstances should a DSC
distress alert be sent from your radio for
test purposes. Such action is a violation of
rules of use for radio equipment, and can
result in heavy fines.
Water ingress
Water ingress disclaimer
Although the waterproof rating capacity of this product
meets the stated IPX standard (refer to the product’s
Technical Specification
), water intrusion and subsequent
equipment failure may occur if the product is subjected
to commercial high-pressure washing. Raymarine
will not warrant products subjected to high-pressure
washing.
Disclaimer
Raymarine does not warrant that this product is error-free
or that it is compatible with products manufactured by
any person or entity other than Raymarine.
Raymarine is not responsible for damages or injuries
caused by your use or inability to use the product, by the
interaction of the product with products manufactured
by others, or by errors in information utilized by the
product supplied by third parties.
Declaration of Conformity
FLIR Belgium BVBA declares that the radio equipment
types Ray90 and Ray91 DSC VHF Radios, part numbers
E70492 and E70493, are in compliance with the Radio
Equipment Directive 2014/53/EU.
The original Declaration of Conformity certificate
may be viewed on the relevant product page at
10
81377-1-en_US_PRINT.pdf 10
12/21/2017 9:05:36 PM
Innovation, Sciences et Développement
économique Canada
This radio complies with the ITU-R M493-13 requirements.
Содержание Ray 90
Страница 1: ...81377 1 en_US_PRINT pdf 1 12 21 2017 9 05 36 PM...
Страница 104: ...Owner notes 81377 1 en_US_PRINT pdf 104 12 21 2017 9 05 38 PM...
Страница 105: ...Owner notes 81377 1 en_US_PRINT pdf 105 12 21 2017 9 05 38 PM...
Страница 106: ...Owner notes 81377 1 en_US_PRINT pdf 106 12 21 2017 9 05 38 PM...