50
Ray218E and Ray55E Marine VHF Radios
You can also add the current channel to memory by pressing and holding the
SCAN/SAVE
key on the microphone. If the channel is already saved, pressing and
holding the key removes the channel from memory.
Using the Watch Modes
The Watch Modes monitor the programmed Priority Channel and other user-
selected channel(s). The watch is halted when activity is detected on a monitored
channel. The Ray218E/Ray55E is equipped with 2 types of monitor operations:
Dual Watch and Tri Watch.
Note:
Monitor modes are disabled when the ATIS operation is active.
Dual Watch
Dual Watch monitors the current working channel and
Channel 16 in cycle.
DUAL 16 appears on the top line of the display.
Dual Watch is demonstrated in the figure to the left; the
sample working channel is channel 72.
Tri Watch
Tri Watch monitors in cycle channel 16, the current
working channel and the channel you have set as the
Secondary Priority (PLUS) Channel.
TRI 16+09 appears on the top line of the display.
Tri Watch is demonstrated in the figure to the left; the
sample working channel is channel 72.
Press the END soft key to terminate Watch mode and return to the previous
working channel.
Press and release the
16/PLUS
key to terminate Watch mode and switch to the
Priority Channel.
Press and release the
CLEAR
key to terminate Watch mode and return to the last-
used channel.
Note:
During Tri Watch Mode, the CH key is inactive and an error beep sounds if pressed.
D9181-1
16
72
D9182-1
16
09
72
