Raymarine Ray 106, Руководство пользователя

Страница: 8 / 47

2.3 ASSEMBLY
2.3.1 AA Battery Holder
Your radio was shipped from the factory with the AA battery holder attached. Removal of this
battery holder is as follows:
1) Using a coin or screwdriver, turn the screw at the base of the AA battery holder
counterclockwise. This will allow you to remove the holder from the radio.
AA Battery Holder Removal
2) There are no batteries installed in the AA battery holder from the factory. To install
batteries, carefully follow the battery insertion drawing found on the door of the battery
holder.
Installation of AA Batteries
AA BATTERY HOLDER USAGE
•
Always carefully note the correct installation of batteries into the battery holder.
•
Only use Alkaline or NiCad AA batteries in the AA battery holder.
•
If rechargeable alkalines or NiCads are used, they must be removed from the AA battery holder
to be recharged. The AA battery holder cannot be used with the desktop/wall charger included
with your radio.
•
Always note the safety, handling, and storage instructions that is included with AA batteries
you may purchase. Especially when storing batteries inside the AA battery holder for extended
periods of time, or emergency use.