32
Note: Retain the protective cap, for use if the open array is removed from the
pedestal in the future. If the pin is damaged during the following
operation you should contact your service dealer.
3. Move the antenna mounting bracket so it sits on the East to West axis
of the digital radar. Lift the open array into position, taking care it is in
the correct orientation and that the threaded alignment guides are
fitted. Carefully align, then slowly lower the array.
Note: The antenna mounting bracket is designed so that the array can only
be fitted to the pedestal in the correct orientation.
4. Once the antenna is seated, remove the alignment guides.
5. Grease the four securing studs with Denso paste (supplied).
6. Use the four nuts and associated washers supplied to secure the
array to the pedestal as shown in the diagram below.
D10425-1
M8 plain washer
Array
Alignment guide
Pedestal
M8 spring washer
M8 nut
Содержание RA1072HD
Страница 1: ...Digital Radar Scanners Installation Manual Document number 87087 1 Date June 2007...
Страница 2: ......
Страница 40: ...36...
Страница 48: ...44...