Raymarine Micro-Talk E70361, Руководство по установке

Страница: 58 / 88

ii. Switch on the chosen display.
If some units do not power up, check that all new units are within 300 mm (11.8 in) of the
chosen display and if required, are connected to a power source.
12. Repeat the steps above until all units have joined the network.
13. If you are replacing older units, remove them from the vessel.
14. Ensure all units are working correctly before mounting them.
Product identification on Micronet
The Micro-Talk gateway is identified differently during the Autonetworking process than when
checking the Health pages from a Micronet display.
During Autonetworking the gateway is identified as an NMEA 2000 device (i.e.:
2000
,
N2000
,
or
N 2000
)
When checking the Health pages from a Micronet display the gateway is identified as Type 7 device
(i.e:
TYP7
,
TYPE7
or
TYPE 7
.
58