I/O Drive - Installation Guide
17
Figure 15:Fitting the Volvo adaptor pin
3. Fit the girdle support bracket onto the spool valve rod:
•
the adaptor pin bracket must sit against, but not on, the
shoulder on the spool valve rod
•
the spring-loaded location pin and the securing bolts must be
on the stern (aft) side of the cable end sheath
•
make sure the bracket is vertical, then tighten the two bolts
Figure 16:Fitting the girdle support bracket
4. Position the I/O drive unit to align its location holes with the fixed
and spring-loaded pins in the girdle support bracket (Figure 17).
T
iller end
block
Split pin
Volvo adaptor pin
D5213-1
D5214-1
Girdle support
bracket
Aft
Spool valve rod
Shoulder
Spring-loaded location pin
