Raymarine i70, Быстрая справка, Страница: 10 / 12

• Stop timer
• Reset timer
• Adjust start times
4.
Using the race timer
Once the Race timer has been set you can use the timer by
following the steps below:
1. When on the Race timer screen Press the
RIGHT SOFT button
and select Quick options form the menu
2. To adjust a timer setting select Adjust start timer .
i. Use the UP and DOWN buttons to select either timer 1,2, or 3.
ii. Use the UP and DOWN buttons to change the timer value to
the required setting and press SELECT to confirm.
3. To start the timer select Start timer from the Quick options
menu.
4. To pause the current running timer select Stop Timer .
5. To resume the timers count down select RESUME from the
Quick options menu.
6. To reset the current timer select Reset Timer .
7. Once the timer reaches zero count up shall begin automatically.
8. To skip to the next timer press the
SKIP key.
9. Whilst the timer is running you can view other favorite pages
as normal.
Audible beeps shall be sounded at defined intervals to alert you
to the timer status as follows:
• Double beep every minute.
• Beep Three times at the start of the last 30 seconds.
• Beep every second for the last 10 seconds.
• Beep for two seconds when the timer reaches zero
Alarms
Alarms are used to alert you to a situation or hazard requiring your
attention.
Some examples of alarms are:
• Anchor alarm — Used when anchored, this alerts you to a
change in depth which could mean that the chain length requires
adjusting.
• Depth and speed alarms — These alarms alert you when your
depth or speed moves outside of specified limits, for example
a minimum depth.
• MOB (Man Overboard) alarm — Received from an MOB system.
When an alarm occurs, a message is displayed and an audible
alarm may sound.
A IS te xt A IS A IS A IS te xt x t x t x t x t
D 12080-1
You can either:
• Silence the alarm, or
• Silence the alarm and edit the alarm settings.
Note: With the exception of alarm clock, speed and sea temp
SeaTalk systems will only be able to switch alarms on/off,
SeaTalk
ng systems will be able to adjust settings.
10
i70 Instrument display Quick reference