Raymarine i50 Depth, Инструкция по установке и эксплуатации

Страница: 28 / 90

SeaTalk power cables
Part number Description
D229 SeaTalk power cable.
4.7 NMEA2000 connection
You can either:
• Use your SeaTalk ng backbone and connect each
NMEA2000 device on a spur, OR
• connect the instrument display on a spur into an
existing NMEA2000 backbone.
Important: You cannot have any 2 terminated
backbones connected together, unless you have
an isolation gateway between the two backbones.
Connecting NMEA2000 equipment to the
SeaTalk
ng backbone
12V NMEA 2000
SeaTalkng
D12380-1
3
1
2
4
1. 12 V dc power supply into backbone.
2. SeaTalk ng backbone.
3. SeaTalk ng to DeviceNet adaptor cable.
4. NMEA2000 equipment.
Connecting the unit to an existing NMEA2000
(DeviceNet) backbone
D12377-1
1
4
2
3
1. SeaTalk ng instrument display
2. SeaTalk ng to DeviceNet adaptor cable.
3. DeviceNet backbone.
4. NMEA2000 equipment.
28 i50