Mounting the ACU-200, ACU-300,
ACU-400
Important:
The installation must only be
performed with the vessel either on a hard
standing, or tied-up alongside a pontoon or berth.
1. Mount the ACU in an appropriate location and
secure with the screws supplied.
You should also mount the autopilot control head
and rudder reference unit (if appropriate) at this
time.
2. Route the power, data and any other cables
required for connection to the ACU.
3. Make all necessary connections into the ACU
connector panel.
The connector panel is accessed by removing
the front cover.
• A — Unlock cover panel
• B — Lock cover panel
5.3 Drive unit installation
For instructions on how to install the drive unit
for your autopilot system, refer to the dedicated
Installation instructions supplied with the drive unit.
Refer to the
section of
this document for a full list of available drive unit
documents.
The documents are also available to
download from the Raymarine website:
47