Raymarine E70498, Руководство по установке

Страница: 43 / 100

Typical cable routing scenarios
There are 4 typical cable routing scenarios.
Note: The routing options described and illustrated in this section assume that a physical data
connection is used between your Radar scanner and multifunction display (MFD). However, if the
scanner is connected to your MFD via Wi-Fi, a physical RayNet connection is not required.
1. Cable routing for a scanner mounted on a platform, using separate cables for the power and
data connection.
2. Cable routing for a scanner mounted on a platform, using the combined power and data cable
from an existing Raymarine Digital Radar scanner installation. For this, the A80308 Y-adapter
accessory is required (not supplied with the scanner).
3. Cable routing for a scanner mounted on a pole, using separate cables for the power and data
connection.
4. Cable routing for a scanner mounted on a pole, using the combined power and data cable
from an existing Raymarine Digital Radar scanner installation. For this, the
A80308 Y-adapter
accessory is required (not supplied with the scanner).
Cable routing — platform mount
There are 2 typical cable routing scenarios for platform mount installations.
• Using separate power and data cables.
• Using an existing combined power / data cable from an older Raymarine Digital radar scanner. In
this scenario, the A80308 Y-adapter accessory is required (not supplied with the scanner).
Cables and connections 43