Raymarine E70498, Руководство по установке

Страница: 21 / 100

3.2 Required additional components
This product forms part of a system of electronics and requires the following additional components
for full operation.
• Compatible Raymarine multifunction display. Refer to for a list of compatible multifunction displays.
• Optional data cable. Refer to Chapter 10 Spares and accessories for suitable cables and adaptors
for existing cable installations. (The Quantum
™
scanner is Wi-Fi-enabled, and can be operated
without a fixed data cable.)
• Use of the Doppler Radar features requires the following data sources to be available on your
system (e.g. connected to your multifunction display, via SeaTalkng ® or NMEA 0183). For more
information refer to:
Doppler data source requirements .
• Use of the MARPA Radar features requires the following data sources to be available on your
system (e.g. connected to your multifunction display, via SeaTalkng ® or NMEA 0183). For more
information refer to:
MARPA data source requirements .
Doppler data source requirements
Use of the Doppler Radar features requires the following data sources to be available on your system
(e.g. connected to your multifunction display, via SeaTalkng ® or NMEA 0183):
Data type Example data source
COG (Course Over Ground) GPS or GNSS receiver (internal or external).
SOG (Speed Over Ground) GPS or GNSS receiver (internal or external).
Heading Compass or Autopilot sensor providing
Fastheading data (e.g. Evolution EV-1 / EV-2).
MARPA data source requirements
Use of the MARPA Radar features requires the following data sources to be available on your system
(e.g. connected to your multifunction display, via SeaTalkng ® or NMEA 0183):
Data type Example data source
COG (Course Over Ground) GPS or GNSS receiver (internal or external).
SOG (Speed Over Ground) GPS or GNSS receiver (internal or external).
Heading Compass or Autopilot sensor providing
Fastheading data (e.g. Evolution EV-1 / EV-2).
Operation instructions
For detailed operation instructions for your product, refer to the documentation that accompanies
your display.
Retain your Wi-Fi passcode
To connect to the Radar using Wi-Fi (wireless), you will need to know the unit’s SSID , and Passcode .
Both the SSID and Passcode are provided on the serial number label on the underside of the unit,
and on spare serial number labels supplied in the box. You may wish to make a separate note of
this information and keep in a secure location. You should also keep the Radar scanner packaging
in a safe place for future reference.
Planning the installation
21