8. Attach a safety lanyard (not supplied) to your vessel, and secure the free end to the scanner using
the attachment point shown in the following illustration:
Item
Description
1
Safety lanyard attachment point.
Note:
If you are installing the Radar scanner on a sailing vessel, additional protection for the Radar
scanner may be required. Refer to
Radar scanner protection — sailing vessels
.
Multiple Quantum Radar scanners
Only 1 (one) Quantum
™
Radar scanner can be used at any one time, per networked system.
If you have more than one Quantum
™
Radar scanner installed on your vessel and want to use them
at the same time, the multifunction displays to which the scanners are connected must NOT be
networked together. This applies to Quantum
™
scanners connected either wired or wirelessly.
For more information, refer to:
Multiple Quantum Radars — more information
.
Multiple Radar scanners — location requirements
Important location considerations when installing multiple radar scanners on the same vessel.
• Scanners should be mounted above each other, vertically separated by at least 0.5 m (1.6 ft). This
applies to all installation locations on the vessel.
• Multiple scanners should be mounted in a way that minimizes interference between the vertical
beamwidths of the 2 scanners.
• In all cases, you should aim to achieve as much physical separation as possible, to minimize
any potential interference.
62
Содержание E70498
