Raymarine E32158, Руководство по установке

Страница: 56 / 68

3.18 Diagnostics
LED Status indicator
LED Status indicator
The LED STATUS indicator on the transceiver provides an indication
of product status.
Color Status
GREEN
Transceiver is operating normally.
GREEN flash x 5 Static data configuration via SD card
commenced
AMBER Either:
• The transceiver is starting up, or
• The transceiver has not transmitted
for more than 2 reporting periods.
This could be due to high AIS traffic
or loss of GPS fix.
RED Fault condition, Refer to the
Troubleshooting section.
RED flash x 5 Static data configuration via SD card
failed
BLUE Transceiver is running in silent mode.
BLUE flash x 2 Voyage data logging has commenced
BLUE flash every 10 seconds SD card full (Voyage data logging
mode)
3.19 Troubleshooting
Issue Action
No power Check:
• All power connections
• Check relevant fuses
• That power supply is at the correct voltage (12 V or 24 V)
AIS configuration
data is not saved
Switch off all associated multifunction displays, then
re-configure
No data Check that:
• Connections are secure throughout the system
• The VHF antenna lead is securely connected.
No vessel data
At the relevant Raymarine multifunction display:
• Place the cursor over the targeted vessel and ensure
the AIS DATA soft key is not set to OFF
• Ensure the AIS layer is set to ON
• Ensure displayed target types are set to ALL
No AIS data Check the NMEA and / or SeaTalk
ng
output from the
multifunction displays to the transceiver input, and ensure:
• The wires are correctly connected
• The baud rate for NMEA is 38400 baud
56 AIS350 / AIS650 Installation instructions