background image

150

E-Series Networked Display Reference Manual

Course Up (C-UP)

            

If you select a new course, the picture will reset to display the new course upwards.

The reference used for Course-Up depends upon the information available at a given 
time. The system always prioritizes this information in the following order.:

1. Bearing from origin to destination, i.e. intended course.
2. Locked heading from an Autopilot.
3. Bearing to waypoint.
4. Instantaneous heading.

Note: 

If heading data becomes unavailable whilst in this mode, a warning message 

will be shown, the status bar indicates the Course Up in brackets and the radar uses 0° 
heading in relative motion. When heading data becomes available once more, Course-
Up mode is reinstated.

To select the orientation mode:

            

The selected motion mode is displayed in the status bar. 

Setting the motion mode

The motion mode controls the relationship between the radar and your boat. There are 
two modes:

• Relative  motion.
• True motion.
The selected motion mode is displayed in the status bar. The default setting is relative 
motion with zero offset

Current course upwards

N

N

D8400_1

As your boat's heading changes: 
  Radar picture fixed 
  SHM rotates accordingly

e.g:

D6592-2

RADAR MODE &
ORIENTATION…

PRESENTATION…

ORIENTATION

H-UP   N-UP   C-UP

Содержание E120W







































































































































































































































































































Отзывы: