8
I/O Drive - Installation Guide
Installation for Volvo (after type 872215)
1. Fit the girdle support bracket (supplied in the installation kit) as
shown in Figure 5:
•
remove the locating pin that attaches the cable rod to the tiller
end block
•
replace it with the girdle support bracket
•
secure the assembly with the supplied split pin
•
rotate the girdle support bracket so that the spring-loaded pin
faces forward
2. Fit the adaptor pin bracket to the cable end sheath (see Figure 6):
•
the adaptor pin bracket must sit against, but not on, the
shoulder on the cable end sheath
•
the securing bolts must be on the stern (aft) side of the cable
end sheath
•
make sure the bracket is vertical
•
tighten the two securing bolts
Figure 5: Fitting the girdle support bracket (Volvo)
Girdle support
bracket
Tiller end block
Split pin
D3366-2
All manuals and user guides at all-guides.com
