System and transducer connections 23
4. Attach the ground spur to the ground screw on the body of
the sounder unit.
2.8 Display connection
Your DSM400 Digital Sounder Module can be connected to
either E-Series or G-Series display units.
How you configure the sounder module depends on the type of
display to which it is going to be connected. Full details will be
found in the relevant documentation for your display.
Connections for both E-Series and G-Series displays are shown
in the following diagrams:
Connecting to an E-Series display
D10994-1
Power
GPS
antenna
DSM400
E series display
CANCEL
OK
RANGE
IN
OUT
PAGE
ACTIVE
WPTS
MOB
MENU
DATA
D10983-1
DSM400 Installation Guide.book Page 23 Tuesday, November 4, 2008 4:53 PM
www.busse-yachtshop.de | [email protected]
