Raymarine CP370, Руководство по установке

Страница: 29 / 102

3.2 Required additional components
This product forms part of a system of electronics and requires the following additional components
for full operation.
• Compatible transducer: transom, through-hull, in-hull, or pocket/keel mount. Refer to the
Raymarine website for a list of transducers that are compatible with your sonar module:
www.raymarine.com/transducers . Refer to CP370: EMC compliance for information about regional
restrictions that apply to transducers used with the CP370 sonar module.
• Compatible Raymarine multifunction display. Refer to Compatible multifunction displays for a
list of compatible products.
• Data cables. Refer to Chapter 4 Cables and connections for suitable cables. Some installations
may also require extensions to data, power or transducer cables. Refer to the Chapter 4 Cables
and connections and Chapter 10 Spares and accessories sections for more information.
CP370: EMC compliance
Important: To ensure EMC Compliance, the transducers listed below are NOT certified to be
used with the CP370 in the following regions:
• Australia;
• New Zealand;
• any member state of the European Economic Area (EEA);
• European Free Trade Association countries Iceland, Liechtenstein, Norway and Switzerland;
• any country that requires EMC Directive Compliance.
If in doubt, please contact your local dealer or Raymarine technical support.
Transducers NOT certified to be used with the CP370 in the regions listed above:
• E66054 (P66, Plastic, Transom mount)
• E66008 (P79, Plastic, In-hull)
• A66091 (B744V, Bronze, Through-hull)
• A66092 (B744VL, Bronze, Through-hull)
• E66013 (P319, Plastic, Through-hull)
• E66014 (B117, Bronze, Through-hull)
• E66085 (B60–20°, Bronze, Tilted element, Through-hull)
• E66086 (B60–12°, Bronze, Tilted element, Through-hull)
Planning the installation
29