4.14 Analog video (Video 2) connection
Analog video sources such as a Thermal or security camera can be connected to your MFD using
the BNC connector on the supplied Power/Video/NMEA 0183 cable. Your MFD will NOT stream this
feed over the SeaTalkhs ® network.
1.
Power/Video/NMEA 0183 cable supplied with your MFD.
2. Analog video device.
3.
(Video 2) Analog video BNC connector.
For installation details, refer to the documentation provided with your analog video device.
Note:
The
HDMI in
and
Video 2
analog connections share hardware internal to the MFD and so cannot
be used at the same time. If devices are connected to both connections then the
HDMI in
connection will take priority.
48
