Raymarine AXIOM Series Скачать руководство пользователя страница 47

Страница: 47 / 84

A80486

Axiom DV to 9-pin DV & 7-Pin Embedded Transducers Y-Cable

A80487

Axiom DV to 9-pin DV & 7-Pin CP370 Transducers Y-Cable

Axiom RV adaptor cables

A80488

Axiom RV to 7-pin Embedded Transducer Adapter

A80489

Axiom RV to 7-pin CP370 Transducer Adapter

A80490

Axiom RV to 9-pin DV Transducer Adapter

A80491

Axiom RV to 25-pin RV & 7-pin Embedded Transducers Y-Cable

A80492

Axiom RV to 25-pin RV & 7-pin CP370 Transducers Y-Cable

A80493

Axiom RV to 7-pin Embedded & 9-pin DV Transducers Y-Cable

A80494

Axiom RV to 7-pin CP370 & 9-pin DV Transducers Y-Cable

Caution: Transducer cable

• Do NOT use the transducer cable to lift or suspend the transducer; always

support the transducer body directly during installation.

• Do NOT cut, shorten, or splice the transducer cable.

• Do NOT remove the connector.

If the cable is cut, it cannot be repaired. Cutting the cable will also void the
warranty.

4.5 Network connection

Your MFD can be directly connected to compatible products using the RayNet connections. Your
MFD can also be connected to a SeaTalkhs ® network when using a suitable network switch.

RayNet to RayNet cable — Connect one end of the RayNet cable to your MFD and the opposite
end to a RayNet device or RayNet network switch.

2. RayNet to RJ45 cable — Connect the RayNet end of the cable to your MFD and the opposite end

to an RJ45 device or RJ45 network switch or coupler.

Compatible network devices, such as a Network switch, Radar scanner, Sonar module, Thermal
camera etc.

Note:

• Refer to the instructions supplied with your network product for specific connection information.

• Refer to

Chapter 9

Spares and accessories

for a list of available network cables.

Connections

Содержание AXIOM Series





















































































Результаты поиска

Содержание AXIOM Series

Отзывы:

Raymarine AXIOM Series, Руководство по установке, Страница: 47 / 84

Результаты поиска

Содержание AXIOM Series

Отзывы: