Raymarine AXIOM 2 XL, Руководство по установке

Страница: 50 / 108

11.1 Analog video (Video 1) connection
Analog video feeds from sources such as a Thermal camera or Security
camera can be connected to your display by connecting the device to the
BNC connector included on the display’s power/video/audio cable. The
video feed can be viewed using the Video app.
1. Display’s POWER | VIDEO 1 | AUDIO connector.
2. Power/Video/Audio cable supplied with your display.
3. Analog video device.
4. (Video 1) Analog video BNC connector.
For installation details, refer to the documentation provided with your analog
video device.
11.2 Analog video (Video 2) connection
Analog video feeds from sources such as a Thermal camera or Security
camera can be connected to your display by connecting the device to the
BNC connector on the Video in/Alarm out cable accessory (part number:
A80235). which is connected to the
ALARM | VIDEO 2 connector located on
the rear of the display. The video feed can be viewed using the Video app.
1. Display’s ALARM | VIDEO 2 connector.
2. Video in/Alarm out cable (part number: A80235) — not supplied.
3. (Video 2) Analog video BNC connector.
4. Analog video device.
For installation details, refer to the documentation provided with your analog
video device.
Note:
• The HDMI IN and VIDEO 2 connections share internal hardware and
cannot be used at the same time. If devices are connected to both
connections then the
HDMI IN connection will take priority.
• The video feed connected to the HDMI IN and VIDEO 2 connections are
NOT streamed on the ethernet network to other displays..
11.3 HDMI IN connection
Digital video can be viewed by connecting a digital video device to the
HDMI IN connector located on the rear of the display using the HDMI cable
accessory (part number: A80219). The video feed can be viewed using the
Video app.
The supported screen resolutions for the HDMI input are:
50