Raymarine A Series A50 Скачать руководство пользователя страница 32

Страница: 32 / 154

A-Series display - User reference manual

2. Using the trackpad move the cursor to the position where you

want the waypoint.

3. Press the

WAYPOINT AT CURSOR

softkey.

4. Press

To place a waypoint at your boat’s position:

1. Press the

WPTS/MOB

button.

2. Press the

WAYPOINT AT VESSEL

softkey.

3. Press

Note:

If the system cannot determine your position, a warning is
displayed and the waypoint cannot be placed.

To place a waypoint using coordinates:

1. Press the

WPTS/MOB

button.

2. Press the

WAYPOINT AT LAT/LON

softkey.

3. Set the position for the new waypoint.
4. Press

Navigating to waypoints

This section explains how to start and stop navigating to a waypoint.
When you navigate to a waypoint, the data is sent to your autopilot.
The waypoint to which you are navigating is the

active waypoint

Note:

Autopilots must be compatible and connected to the A-
Series display as shown in the installation guide.

For detailed information on navigating with waypoints, see

The chart

application on page 37

To navigate to a waypoint

1. Highlight the waypoint.
2. Press the

GOTO WAYPOINT

softkey.

1. Press either the

WPTS/MOB

button or

GOTO

softkey.

2. Press the

GOTO WAYPOINT OPTIONS

softkey.

3. Select the appropriate waypoint from the list.
4. Press

GOTO WAYPOINT

To stop navigating to a waypoint

1. Highlight the waypoint.
2. Press the

STOP GOTO

softkey.

1. Press the

WPTS/MOB

button.

2. Press the

GOTO WAYPOINT OPTIONS

softkey.

3. Press the

STOP GOTO

softkey.

D8285_1

81314-1_A Series Reference Guide.book Page 32 Thursday, August 28, 2008 9:23 AM

Содержание A Series A50



























































































































































Результаты поиска

Содержание A Series A50

Отзывы:

Raymarine A Series A50, Руководство пользователя, Страница: 32 / 154

Результаты поиска

Содержание A Series A50

Отзывы: