RAYLASE SP-ICE-1 PCI/e PRO, Руководство по оборудованию

Страница: 13 / 22

Chapter 2 Technical Data
13 RAYLASE SP-ICE-1 PCI/e PRO Control Cards MN055 / v1.4.0
2.4.6 Laser Control Interface
This connection provides a complete interface for laser control with the following signals.
FPS = first pulse suppression, LM = laser modulation, MIP = mark in progress
CAUTION: A short-circuit on a signal line will immediately destroy the SP-ICE-1 PCI/e PRO
control card!
Please note: Some of the input functions can be applied additionally at Laser / I/O Interface
(J2). The request of these signals is performed via an OR-function.
Specifications
I8 PIN Signal PIN Signal
26PIN
ITC
26 GND 25 GND
24 TTL Outp. /REMOTE_EXE_2 23 Analog Output ANA_OUT_1
22 TTL Outp. /REMOTE_EXE_1 21 TTL Outp. /MIP
20 TTL Input 24V /STOP_MARK 19 TTL Input 24V /PC2
18 TTL Input 24V /PC1 17 TTL Input 24V /START_MARK
16 TTL Input 24V /PA7 15 TTL Input 24V /PA6
14 TTL Input 24V /PA5 13 TTL Input 24V /PA4
12 TTL Input 24V /PA3 11 TTL Input 24V /PA2
10 TTL Input 24V /PA1 9 TTL Input 24V /PA0
8 Diff. Outp.+ FPS 7 Diff. Outp.- /FPS
6 Diff. Outp.+ LM_GATE 5 Diff. Outp.- /LM_GATE
4 Diff. Outp.+ LM 3 Diff. Outp.- /LM
2 Output +5V (VDD) 1 Analog Output ANA_OUT_2
Analog Output TTL Outputs
Amplitude 0V to +10V ±1% - TTL low max. 0.5V max. 4 mA
Output current max. 5mA TTL high 3.84 to 5V max. 4 mA
Bandwidth 1kHz
DAC resolution 16 Bits
Noise ratio (

1 GHz) min. 60dB
TTL Input 24V Diff.Output-, Diff.
Input low max. 1.3V Output low max. 0.5V max. 40mA
Input high 1.6 bis 24.0V Output high min. 2V max. 40mA
Hysteresis typ. 1.1V
Input impedance ca. 3k Ω
ESD protection ±8kV