Troubleshooting
Ragyer won’t turn on.
1. Ensure that the power plug is securely inserted into the jack,
and that the power switch is turned on.
2. Check to make sure that your outlet has power and is turned
on.
Power indicator light is on, but the LED strips won’t come on.
1. Ensure that the sensitivity knob is turned up enough.
2. If you are using the mic input, ensure that the music is loud
enough. Try clapping your hands near the control box to see if it
turns on.
3. Ensure that both of the aux cables are removed from the
Rayger, as that will automatically turn on the mic function.
4. If you are using the aux input, make sure that the volume is
turned all the way up on your source and that it isn’t muted.
5. Ensure that both aux jacks are firmly inserted into the Rayger.
Lights are on too much and don’t flash.
1. Turn the sensitivity knob down while you are playing music until
the lights flash the desired amount.
2. Ensure that both aux jacks are firmly inserted into the Rayger.
Lights aren’t sticking properly and are coming off the wall.
1. Use a bit of clear packaging tape to secure the strips where
they are falling off.
2. Ensure there isn’t tension in the wires between the control box
and the strips.
Still not working? Email us at: [email protected]
