Wuhan Raycus Fiber Laser Technologies Co., Ltd.
User Guide of RFL-C4000S-CE
20
a) AC INPUT:
The socket for supply source input that can only be mated with the plug on
the power cord we provided (See Table 4 product technical parameters for laser model
and corresponding input voltage). Please use only the enclosed power cord provided by
Raycus.
b) CTRL-INTERFACE:
Control interface, CTRL-INTERFACE interface (DB-25),
multi-function multiplex interface, users can set control mode, input analog voltage
signal, modulate 24V signal, and it is also an alarm signal output interface.
c)
RS232
：
Provide remote control and fault information storage of the laser.
d) WATER:
Pipe connectors, the inlet and outlet for cooling water to flow in and return.
(See Table 5 for the laser model and corresponding water pipe size for cooling system
requirements)
e) ETHERNET:
Ethernet interface. It can provide remote control and storage alarm
information for the laser.
f) CDA
：
Dry air inlet.
4.3 Power Connection
CAUTION:
Before connecting the product to AC supply source, you must
check for sure that the AC supply you will apply is in accordance with the
specifications provided in Table 2 or 4.
Table 6Power Connection Requirements
Model
RFL-C4000S-CE
Supply Source
380±15% V AC 50/60Hz
Power Cord
