Raycus RFL-C30000XZ, Руководство пользователя

Страница: 56 / 93

Wuhan Raycus Fiber Laser Technologies Co., Ltd.
User Guide of RFL-C30000XZ
48
5. Click main power ON button;
6. Wait for Ready;
7, Set the wave number of pre-operations
（
program number is more than 0
）
;
8, The lifting edge of MOD signal starts wave;
Note: high level time of MOD must be more than program operation; if MOD gives the falling
edge in advance, the computer software will show that the laser program is stopped abnormally.
6.5 S
et
the power analog as
emission external control
on the REM mode
Figure 29 Wiring diagram of setting the power analog as emission external control on the REM
mode.