raycop RS2, Начало, Страница: 8 / 15

End Cap
Filter
Brush
Slide the grille hooks at both ends until the green point appears to remove them.
Remove the surface brush
from the cap side.
Grille Hook
Green Point
Pull out the
dust box as
shown below.
Air dry your filter in a
shaded area, do not use a
dryer. Once dry, secure the
filter back into the dust box.
1
1
Remove the dust box filter by pressing
the protrusions on both sides.
2
3
Surface Brush
For more maintenance and parts replacement
(such as: the UV-lamp & HEPA filter) information,
please visit raycop.com/maintain
3
To avoid dust from scattering
into the air, submerge both the
dust box and filter in water and
remove the filter from the dust box.
Note: If the filter is clogged, you may
notice that the suction is weaker.
Clean the filter with a mixture of
water:detergent (ratio 9:1).
2
Securely attach the dust box by
pressing it into the cleaner until
the dust box lamp goes out.
4
Detach the cap and
remove house dust or
hairs entangled in the
surface brush. If the
brush is excessively dirty,
wash it with detergent
or soap, rinse with water,
and thoroughly dry.
C
LE
AN
ING
YOUR RAYCO
P R
S2