Rayco RG80 2019, Инструкция по эксплуатации и запасным частям

Страница: 4 / 62

RG80 Parts Manual
4
Secure all loose items such as lunch boxes, tools, and other
items that are not a part of the equipment.
Know the appropriate work site hand signals and the personnel
that are authorized to give the hand signals. Accept hand
signals from one person only.
Do not smoke when you service an air conditioner. Also, do
not smoke if refrigerant gas may be present. Inhaling the fumes
that are released from a flame that contact air conditioner
refrigerant can cause bodily harm or death. Inhaling gas
from air conditioner refrigerant through a lighted cigarette
can cause bodily harm or death.
Never put maintenance fluids into glass containers. Drain
all liquids into a suitable container.
Obey all local regulations for the disposal of liquids.
Use all cleaning solutions with care. Report all necessary
repairs.
Do not allow unauthorized personnel on the equipment.
Unless you are instructed otherwise, perform maintenance
with the equipment in the servicing position. Refer to
Operation and Maintenance Manual for the procedure for
placing the equipment in the servicing position.
When you perform maintenance above ground level, use
appropriate devices such as ladders or man lift machines.
If equipped, use the machine anchorage points and use
approved fall arrest harnesses and lanyards.
Machine Description
The RG80 Series stump cutter is designed for your maximum
benefit for every dol lar spent. The machine is constructed for
durability and easy maneuvering, for those hard to reach tree
stumps and roots. Its 23” diameter cutting wheel with 24
Rayco Supertooth® is pow er ful ly driven through a variable
displacement axial piston pump and a synchronous belt with a
85 hp Ford 2.5L, EPA/CARB compliant, Vertical 4-cycle, liquid
cooled gasoline engine at its source. Cutting boom motion
and the self-propel drive are entirely hydraulic, with 2 speeds.
The ma chine chassis features rectangular steel tubing and
steel guard con struc tion, mount ed on extra grip ping deep
tread tires. The operator benefits from a remote operator
station which allows optimal views of the cutting action, all
while being guarded by heavy rubber curtains.
The RG80 Series stump cutter has the ability to pass through
a 47” gate under its own power. Other special features of
the RG series include a slewing ring that is used to pivot the
cutter boom, replaceable composite bushings on all cylinder
ends, 10.2 gallon fuel tank, steel belt guards, and an easy
access ignition switch on the machine.
Other options that have become available on the RG series
are dual removable travel wheels for increased stability and
travel traction, Command Cut®, and a blade for pushing
chips back into place.
For further design information see the “Specifications” section
Machine Description
CALIFORNIA PROPOSITION 65
WARNING THIS MACHINE AND ITS
CONSTIUENTS ARE KNOWN IN THE STATE
OF CALIFORNIA TO CAUSE CANCER AND
REPRODUCTIVE HARM.
VISIT WWW.P65WARNINGS.CA.GOV