Sensor Testing
If the sensor is disconnected or short-circuited, the heating system is
turned off. Test your sensor according to the following resistance table:
Error Codes
E0: Internal error. The thermostat must be replaced.
E2: External sensor short-circuited or disconnected.
Sensor
Temp (˚C)
Temp (˚F)
Value (ohm)
–10
–14
64000
0
32
38000
10
50
23300
20
68
14800
30
86
9700
QuickStat Installation & Operation Manual
6
Worldwide Headquarters
Tyco Thermal Controls
300 Constitution Drive
Menlo Park, CA 94025-1164
USA
Tel (800) 545-6258
Fax (800) 596-5004
[email protected]
www.tycothermal.com
Canada
Tyco Thermal Controls
250 West St.
Trenton, Ontario Canada K8V 5S2
Tel (800) 545-6258
Fax (800) 596-5004
Important
:
All information, including illustrations, is believed to be reliable.
Users, however, should independently evaluate the suitability of each product for
their particular application. Tyco Thermal Controls makes no warranties as to the
accuracy or completeness of the information, and disclaims any liability regarding
its use. Tyco Thermal Controls' only obligations are those in the Tyco Thermal
Controls Standard Terms and Conditions of Sale for this product, and in no case
will Tyco Thermal Controls or its distributors be liable for any incidental, indirect,
or consequential damages arising from the sale, resale, use, or misuse of the
product. Specifications are subject to change without notice. In addition, Tyco
Thermal Controls reserves the right to make changes—without notification to
Buyer—to processing or materials that do not affect compliance with any applica-
ble specification.
© 2005 T
yco Thermal Controls LLC H57725 12/05
Tyco, Raychem, QuickNet and QuickStat are trademarks of Tyco Thermal Controls LLC
or its affiliates.
