QuickStat
®
Thermostat
Installation & Operation Manual
General Information
Use of this Manual
This manual covers the installation and operation of the Raychem
®
QuickStat
®
thermostat and must be used with the following document:
•
QuickNet
®
System Installation Manual
(H57704)
Important:
For the Tyco Thermal Controls warranty and agency approv-
als to apply, the instructions included in this manual and product pack-
ages must be followed.
Features
QuickStat is an electronic thermostat that must be used with the
Raychem QuickNet floor heating mats.
QuickStat provides the following features:
• Includes an integrated Class A, Ground-fault Circuit Interrupter (GFCI)
at 120 V. If the QuickStat is powered at 208 V or 240 V, a separate
GFCI must be used.
• Operates at 120 V, 208 V, 240 V 50/60 Hz.
• Switches on your heating system at predetermined times on different
days of the week.
• Offers 4 periods (called events) each day that you can set at different
temperatures.
• Comes with a preprogrammed schedule that is suitable for most
installations. However, you can customize this program any time you
wish.
• Allows you to reset the thermostat to factory settings.
• Changes the start time of a heating period automatically so that the
desired temperature is reached at the time that you set.
• Controls the temperature of the floor through a temperature sensor
that is placed in the floor construction.
Specifications
Approvals
C
US
LISTED
2D03
E255369
Technical Data
Supply Voltage
120 V, 208 V, 240 V ±15%, 50/60 Hz
Maximum switching current 15 A
Wiring
12 AWG to 22 AWG
GFCI
Class A, 5 mA trip level (at 120 V only)
Temperature control range
40 to 104°F (5 to 40°C)
Ambient temperature range
Thermostat
32 to 104°F (0 to 40°C)
GFCI
– 31 to 149°F (– 35 to 65°C)
A
B
C
Kit contents
A
1
QuickStat thermostat
B
2
Mounting screws
C
1
Floor temperature sensor 10 ft (3m)
