H910 Installation Instructions
• Score between bus
wires at base jacket.
• Bend core to break
free at base jacket.
• Peel core and any
remaining material
from bus wires.
Repeat steps through
6 for other heating cable
sections.
Do not cut
bus wires.
6
Mastic
1"
2"
Mastic
1/4"
Pinch
9"
6"
• Remove release paper
from mastic strip.
• Wrap a piece of
mastic around the
outer jacket on each
heating cable section.
• Remove release paper
from mastic strip.
• Wrap a piece of mastic
around the end of each
heating cable section
and position as shown.
• Pinch the mastic
in the center to
completely seal the
core at the end of
each heating cable.
• Carefully align the
heating cable sections
and place them together.
• Press mastic strips
firmly together.
• Fasten with a cable
tie at each of the two
positions shown.
7
8
9
