nVent.com
|
2
Raychem-AR-H58490-910QuickStart-EN-1805
FOUR MODES OF OPERATION
• Press [Shift] and the next key pressed is in use. Indicated by LED
light above.
• Use [
▲▼
] keys to change the numeric values.
• Press [Enter] to select or save.
• Press [Back] to exit menu and return to scan mode.
ACKNOWLEDGE AN ALARM
1 Press[Shift]+[Test].TheLEDabovethewordAlarmis
illuminated.
2 Thedisplaywillscrollthroughwhattypeofalarmisindicating.
3 Press[Enter]toresettheAlarm,use[
▲▼
] keys to navigate.
4 Press[Enter]againtosave.
CHANGE A SET POINT
1 Press[Shift]+[Enter].TheLEDabovethe
word Config is illuminated.
2 Press[Enter]againandthesetpointnumericvaluewillblink.
3 Use[
▲▼
] keys to change the numeric value.
4 Press[Enter]tosave.
ACCESS MAINTENANCE DATA
1 Press[Shift]+[Back].TheLEDabovethewordMonitoris
illuminated.
2 Use[
▲▼
] keys to scroll through the menu.
3 Scrolldownto“MaintenanceData...”Press[Enter].
4 Additionalsub-menuwillopenuptoviewmoredata.
NAVIGATING CONFIGURE MODE MAIN MENU
BASIC MODE MENU
Control Set Point
Lo TS 1
Lo Load`
Switch Control Mode
Circuit Breaker
Temperature Units
Feature Mode (Basic)
Control Set Point
Lo TS 1
Lo Load
Hi GFI
GFI Trip
Feature Mode (Advanced)
TS Alarms Configuration Sub-Menu...
Other Alarms Configuration Sub-Menu...
Point Setup Sub-Menu...
Misc. Setup Sub-Menu...
Communications Setup- Sub-Menu...
ADVANCED MODE MENU
*Please reference the manual for the complete
list of configuration sub-menus.
**Menuitemswithtrailing“...”indicatetheentrypoint
to a sub-menu.