16
position.
1. Give a gentle push on the primer pump
repeatedly (7-10times) until fuel comes
into the primer pump.
2. Cold Starts: Pull lever up to close choke.
3. Pull starter handle until engine flash. fires.
4. Push choke lever inwards (excessive cranking with choke lever will cause
flooding engine making it difficult to start).
5. Pull starter handle until engine starts.
6. Allow engine to warm up for a few minutes before using.
STARTING WARM ENGINE
If fuel tank was not run dry, pull starter. one to three times and should
start.
DO NOT USE CHOKE
If fuel tank was run dry, after refilling
repeat steps 3 thru 7 in. STARTING
COLD ENGINE.
STOPPING THE ENGINE
Move switch to STOP position
MAINTENANCE &
CARE
AIR FILTER
Accumulated dust in the air filter will
reduce engine efficiency. Increase fuel
consumption and allow abrasive particles
to pass into the engine. Remove the air
filter as often as necessary to maintain in
a clean condition.
Light surface dust can readily be removed
by tapping the filter. Heavy deposits
